Very pleasured to share the professional star lights for car installation with all friends now.
1. Remove the headliner roof from your car truck or SUV.
2. Mark star points of the pattern you want.
3. Drill holes vertically of the points you marked.
4. Insert the PMMA fiber optic cables about 10cm into the board. Then fix with hot melt adhesive or glass cement.(Best choice is the UV glue)
5. Straighten and tie up PMMA fiber optics in small bundles to avoid tangled. Better to count the quantity and length of fiber optic cables in advance before insert them into holes. And mark which bunch use at which area.
6. Connect and power on to test. Clip off the excess length from beneath with nail clippers and finish installation.
7. The fiber optic illuminator is recommed to hide the C Pillar, and controlled by
the wirless remote controller or Bluetooth/APP in cellphone.
Please check the Car Star Light Installation Details on the below. 3. Drill holes vertically of the points you marked.
4. Insert the PMMA fiber optic cables about 10cm into the board. Then fix with hot melt adhesive or glass cement.(Best choice is the UV glue)
5. Straighten and tie up PMMA fiber optics in small bundles to avoid tangled. Better to count the quantity and length of fiber optic cables in advance before insert them into holes. And mark which bunch use at which area.
6. Connect and power on to test. Clip off the excess length from beneath with nail clippers and finish installation.
7. The fiber optic illuminator is recommed to hide the C Pillar, and controlled by
the wirless remote controller or Bluetooth/APP in cellphone.
If you still have any question about the installing the CAR STAR LIGHTS, warm welcome to contact us via email or log on our TIKTOK account (@Ledstarlightheadliner) and check the Video for the installation progress.
SANLI LED CO., Ltd
Dec 21th, 2022
SANLI LED CO., Ltd
Dec 21th, 2022